Global CemFuels News
Search Fuels News
Essroc Cement Speed plant to hold public hearing on waste fuels
Written by Global CemFuels staff
28 January 2016
US: The Indiana Department of Environmental Management will hold a public hearing about the use of liquid waste-derived fuel at the Essroc Cement Speed plant. Essroc Cement is applying for a state environmental permit to burn liquid waste-derived fuel in one of its cement kilns in the unincorporated Clark County community of Speed. Residents have expressed concerns about the plants. No date for the meeting has been set, according to Associated Press.
Mike McHugh, the Speed plant's director, said Essroc plans to use products mostly from the petroleum industry, such as paint thinners, antifreeze and acetone. The plant will have to build two small storage facilities for it to start replacing about 25 – 30% of the coal it burns with liquid waste-derived fuel.
Essroc Corporate Environmental Engineer Luis Rodriguez said the company welcomes the public's questions. The company hosted an open house and talked with community leaders in 2014 before it submitted its application. "We actually want it to go to public comment so we can answer some of these questions... We've wanted to be as upfront on this as possible," said Rodriguez.
Hormicreto orders two calciner burners and hot gas generator from FCT Combustion
Written by Global CemFuels staff
15 January 2016
Ecuador: Hormicreto has ordered two calciner burners and a hot gas generator for its swing mill application, for alternative liquid fuels firing, with a thermal capacity of 5.2MW, including the complete the fuel pumping, heating and valve train, from FCT Combustion for its cement plant in Cuenca, Ecuador.
Solid recovered fuel plant breaks ground in the USA
Written by Global CemFuels staff
08 January 2016
US: A waste-to-solid-fuel plant has broken ground in West Virginia. Its developers say it is the US' first resource recovery facility that employs mechanical biological treatment (MBT).
The waste-to-solid-fuel plant in Martinsburg, West Virginia, called Entsorga WV, is expected to be operational in early 2017. Entsorga WV is a joint venture between Apple Valley Waste Technologies, Entsorga USA and Chemtex International.
By utilising the HEBioT MBT system, Entsorga WV will recover biomass, plastics and other carbon based materials from the mixed municipal solid waste (MSW) stream and convert them into an alternative fuel. When processing the MSW, Entsorga WV will remove other recyclable commodities such as ferrous and non-ferrous metals. The MSW received will be converted to solid recovered (SRF), which will be used as an alternative or supplement to fossil fuels.
The plant will be able to produce about 50,000t/yr of SRF, which will be delivered to the Essroc Cement Plant and used in conjunction with coal. The companies have entered into a long-term contract for the provision and acceptance of the SRF.
The reduction of waste that will be disposed of in landfills as a result of the Entsorga facility will result in a greenhouse gas emission reduction of 28,000t/yr of carbon dioxide equivalent. There are currently more than 330 MBT plants in operation throughout Europe, processing more than 30Mt/yr of municipal solid waste.
HeidelbergCement and Joule announce partnership to explore carbon-neutral fuel application
Written by Global CemFuels staff
16 December 2015
Germany: Joule, a producer of liquid fuels from recycled CO2, and HeidelbergCement have announced a partnership to explore the application of Joule's technology to mitigate carbon emissions in cement manufacturing. A successful partnership between Joule and HeidelbergCement could result in the co-location of Joule's Helioculture Technology at one or more HeidelbergCement sites around the world.
Since 1990, HeidelbergCement has worked to decrease its carbon emissions, initiating various programmes across the organisation that have reduced emissions by 23%. HeidelbergCement said that its partnership with Joule represents another example of its sustained dedication to leveraging innovative technologies and programmes for climate protection. As part of the agreement, emissions from various HeidelbergCement plants could provide Joule with the waste CO2 required to feed its advanced Helioculture platform that effectively recycles CO2 back into fuel.
"We've been focused on lowering carbon emissions for more than two decades and we are excited to take further steps to lower our CO2 emissions by working with a dedicated organisation with state-of-the-art technology that is committed to protecting the climate," said Jan Theulen, Director of Alternative Resources at HeidelbergCement. "Joule's process, which effectively recycles waste CO2 into liquid fuels, is a perfect match for HeidelbergCement and our core values and we look forward to starting the journey towards a long-term, mutually beneficial relationship."
Joule's Helioculture process directly and continuously converts sunlight and waste CO2 into infrastructure-ready fuels, including ethanol and alkanes that serve as highly blendable feedstock for diesel and jet fuel products. Only requiring abundantly available inputs, including sunlight, brackish or sea water and waste CO2, the process is well suited for global deployment. For organisations like HeidelbergCement, Joule turns a carbon challenge into a carbon solution by capturing and recycling waste CO2.
"Carbon emissions are a challenge faced by many industries that are of critical importance to everyday life, such as cement," said Brian Baynes, CEO of Joule. "We are pleased to have the opportunity to partner with HeidelbergCement in an attempt to develop a modern, ultra-low carbon cement manufacturing process."
Raysut Cement to install gas reduction station
Written by Global CemFuels staff
16 December 2015
Oman: Raysut Cement Company has signed an agreement with Arabian Industries for the installation of a gas pressure reduction station (GPRS) at its Raysut plant. Oman Gas Company has been appointed as the Project Management Consultant. Upon completion of the GPRS, cement production will be boosted by 120,000-130,000t/yr. Total investment in the project is estimated at US$5.45m.